Concrete Driveways Winnipeg

A DRIVEWAY BUILT FOR MANITOBA WINTERS

No Hidden Costs • No Mess • No Regret

Tear-out, base, rebar and finish, done right the first time, so your driveway doesn’t heave, crack or flake after a few Winnipeg winters.

What Goes Into a Hyde Park Driveway

Most driveway failures in Winnipeg come down to what you can’t see: a thin base, weak concrete or missing steel. That’s where we don’t cut corners. Every driveway we pour gets the same spec, whether it’s a single-car pad or a three-car approach.

  • We order 32 MPa concrete with 5–8% air entrainment. Those microscopic air bubbles give water room to expand when it freezes, which is what stops the surface from scaling and flaking after a Winnipeg winter.

  • A full grid of 10M rebar at 16 inches on centre, set on chairs so it sits in the middle of the slab where it actually does its job. If the ground shifts underneath, the steel holds the slab together.

  • Microfibres are blended right into the concrete to control the small shrinkage cracks that form as a slab cures. The rebar carries the big loads; the fibres protect the surface.

  • We dig down to solid ground, bring in and compact a granular base, and slope the slab away from your house and garage so water runs off instead of sitting and freezing.

What Does a New Driveway Cost?

Here’s what Winnipeg homeowners typically pay with us. Send us your details and a few photos, and we’ll give you a price range by phone before we ever come out. No job is too small, though smaller jobs carry a minimum charge.

  • Typically $14–$24 per sq ft installed, including base prep, rebar and finishing. Size, access and site conditions decide where your job lands in that range.

  • Exposed aggregate typically adds $4–$9 per sq ft. Stamped and coloured concrete typically adds $7–$15 per sq ft, depending on the pattern and colours you choose.

  • Tear-out and haul-away of your existing concrete or asphalt typically runs $2–$5 per sq ft.

  • Size, how much old concrete comes out, access for trucks, soil conditions, slab thickness and finish. Your written quote spells out every line, so there are no surprises.

  • Fresh concrete needs warmth to hydrate and gain strength. After about Labour Day, a sunny afternoon can still feel fine, but overnight lows stall the curing process. The slab looks great going into winter, then scales, flakes or pops the following spring. That’s why we wrap up exterior flatwork around Labour Day; we’d rather book you for the first warm weeks of spring than pour a driveway that won’t last.

How We Build Your Driveway

From the first visit to the day you park on it, here’s what to expect. Most driveways take two to four days of site work, plus curing time.

  • Send us your details and a few photos, and we’ll talk it through by phone and give you a price range. Once you’re comfortable with it, we come out, measure, check grades and drainage, and give you a final, itemized number on the spot. Sign off and leave a deposit, and you’re on the schedule.

  • We break out and haul away the old driveway, dig down to solid ground, and build up a compacted granular base.

  • Forms are set to grade, the rebar grid goes in on chairs, and we pour, finish and saw-cut control joints, all in one day.

  • Concrete keeps gaining strength for weeks: roughly 15–20% after 1 day, 40% at 3 days, 65–70% at 7 days, 85–90% at 14 days and full design strength at 28 days. You can walk on it after 24–48 hours. Wait two weeks before parking on it, and longer for heavy trucks or trailers. Keep it from drying out too fast in the first week; we’ll leave you clear care instructions.

Trusted by Your Neighbours

“From on-site consultation to quoting and permitting, we were taken care of every step of the way—it was a relief to have one less thing to concern ourselves with. The workers and the workmanship were great, and we found the whole process timely and pleasant.”

Duane & Kristin

Let’s Build Something Solid.

Whether it's a new driveway or a commercial foundation, we’re ready to help. Send us your project details and we'll give you a straight answer on fit, timing and cost.